Click to purchase RP RV1103 open source motherboard now > >
Main hardware index | |
Size | Long 120mm x wide 90mm x high 14mm |
CPU | Rockchip RV1103 mononuclear A7+MCU |
NPU | 0.5 TOPS NPU |
Memory | Built-in DDR2 standard 64MB |
Storage device | Standard 128MB for SPI |
Power management | Design of discrete power supply |
Working voltage | Input voltage 5V maximum power less than 1.5W (without any peripherals) |
Support system | Linux5.10.66 |
Operating temperature | -10 to + 75 degrees |
Common interface of backplane | |
USB interface | 4-way USB, 2-way standard A, 1-way TYPE-C, 1-way interpolation |
UART serial port | 2 TTL 3.3V level, one of which is Debug |
SDIO interface | 2 SDIO interfaces, one TF card, the other WIFI. |
GPIO interface | 10-way available GPIO |
Camera interface | 2 mipi csi camera inputs |
Voice input | One microphone input |
Voice output | 1 channel left channel output, 2W power amplifier attached to the backplane |
WIFI | Support dual-band 2.4G AP6212 |
Bluetooth | Support Bluetooth 4.2, support BLE mode |
Ethernet | By default, it is connected to RMII 10max 100m. |
4G | Support 4G Netcom module pcie USB interface |
Output power supply | Multi-channel power output 3.3V 5V |
System upgrade | Support for local USB upgrades |
RTC | Button battery interface |
Hardware function | Busybox linux 5.10.66 |
Tcpy-c (5V power supply) | √ |
MASKROM button (upgrade button) | √ |
RECOVERY button | |
SDIO AP6212 WIFI | √ |
Ethernet 10M/100M | √ |
SPK | √ |
MIC (microphone) | √ |
DEBUG | √ |
UART3 | √ |
RTC | √ |
USB2.0 x2 | √ |
USB2.0 (pin) | √ |
4G module expansion | √ |
SIM | √ |
MIPI CSI (gc2093) | √ |
TF | √ |
NCA9555 (gpio extension) | √ |
Bus driver | |
ADC driver | √ |
PWM driver | √ |
SDIO driver | √ |
GPIO driver | √ |
USB driver | √ |
Can driver | √ |
I2s drive | √ |
I2C drive | √ |
Spi driver | √ |
Project | Minimum | Typical | Maximum | |
Power supply parameters | Voltage | 4.5 | 5V | 5.5V |
Ripple | -- | 50mV | ||
RTC (HYM8563) | 0.3uA | 0.9uA | 1.2uA | |
Current test with backplane | Power-on current | 31mA | 62mA | 155mA |
Desktop static current | 68mA | |||
Environment | Relative humidity | -- | 65% | 75% |
Operating temperature | -10 ℃ | -- | 75 ℃ | |
Storage temperature | -30 ℃ | -0 ℃ | 100 ℃ |
Click to purchase RP RV1103 open source motherboard now > >
Main hardware index | |
Size | Long 120mm x wide 90mm x high 14mm |
CPU | Rockchip RV1103 mononuclear A7+MCU |
NPU | 0.5 TOPS NPU |
Memory | Built-in DDR2 standard 64MB |
Storage device | Standard 128MB for SPI |
Power management | Design of discrete power supply |
Working voltage | Input voltage 5V maximum power less than 1.5W (without any peripherals) |
Support system | Linux5.10.66 |
Operating temperature | -10 to + 75 degrees |
Common interface of backplane | |
USB interface | 4-way USB, 2-way standard A, 1-way TYPE-C, 1-way interpolation |
UART serial port | 2 TTL 3.3V level, one of which is Debug |
SDIO interface | 2 SDIO interfaces, one TF card, the other WIFI. |
GPIO interface | 10-way available GPIO |
Camera interface | 2 mipi csi camera inputs |
Voice input | One microphone input |
Voice output | 1 channel left channel output, 2W power amplifier attached to the backplane |
WIFI | Support dual-band 2.4G AP6212 |
Bluetooth | Support Bluetooth 4.2, support BLE mode |
Ethernet | By default, it is connected to RMII 10max 100m. |
4G | Support 4G Netcom module pcie USB interface |
Output power supply | Multi-channel power output 3.3V 5V |
System upgrade | Support for local USB upgrades |
RTC | Button battery interface |
Hardware function | Busybox linux 5.10.66 |
Tcpy-c (5V power supply) | √ |
MASKROM button (upgrade button) | √ |
RECOVERY button | |
SDIO AP6212 WIFI | √ |
Ethernet 10M/100M | √ |
SPK | √ |
MIC (microphone) | √ |
DEBUG | √ |
UART3 | √ |
RTC | √ |
USB2.0 x2 | √ |
USB2.0 (pin) | √ |
4G module expansion | √ |
SIM | √ |
MIPI CSI (gc2093) | √ |
TF | √ |
NCA9555 (gpio extension) | √ |
Bus driver | |
ADC driver | √ |
PWM driver | √ |
SDIO driver | √ |
GPIO driver | √ |
USB driver | √ |
Can driver | √ |
I2s drive | √ |
I2C drive | √ |
Spi driver | √ |
Project | Minimum | Typical | Maximum | |
Power supply parameters | Voltage | 4.5 | 5V | 5.5V |
Ripple | -- | 50mV | ||
RTC (HYM8563) | 0.3uA | 0.9uA | 1.2uA | |
Current test with backplane | Power-on current | 31mA | 62mA | 155mA |
Desktop static current | 68mA | |||
Environment | Relative humidity | -- | 65% | 75% |
Operating temperature | -10 ℃ | -- | 75 ℃ | |
Storage temperature | -30 ℃ | -0 ℃ | 100 ℃ |