Main hardware indicators | |
Size | 130mm long x 100mm wide x 14mm high |
CPU | Allwinner T507 quad-core A53 frequency 1.5GHz |
NPU | Mali-400 G31 GPU |
RAM | LDDR4 standard 2G (1G/2GB batch optional) |
Memory | eMMC standard 8G (16G/32G/64G batch optional) |
Power management | AXP853T supports standby, key switch |
Operating Voltage | Input voltage 12V, maximum power is less than 3W (no peripherals connected) |
support system | Andriod/Linux+QT |
Operating temperature | -25 to +75 degrees |
Life span | Continuous operating life is more than 5 years |
Commonly used interfaces of the backplane | |
---|---|
USB interface | 5 USB, three external plugs, one of which is OTG, two internal plugs |
UART serial port | TTL 3.3V level, one of which is Debug |
SDIO interface | 2 SDIO interfaces, one TF card, the other connects to WIFI |
ADC interface | 2-way ADC interface |
I2C interface | 2-way I2C interface |
GPIO interface | 4 channels available GPIO, can be connected with 5V or relay device |
4G | MINI PCIE interface supports 2G/3G/4G full Netcom |
LVDS display | 1 channel LVDS maximum support 1920x1080 1080P 60fps |
RGB display | 1 channel RGB 888 output, maximum support 1920x1080 1080P 60fps |
HDMI display | 1 HDMI output Maximum support 4K 60FPS |
CVBS output | 1 CVBS output |
MIPI CSI input | Support 4lane MIPI CSI input |
Voice output | 1 channel left and right channel output, 5W power amplifier connected to the bottom board |
Voice input | 1 microphone input, one lane in input (AC107 on the bottom board) |
Fast Ethernet | 100M RMII Ethernet |
Gigabit Ethernet | 100M/1000M RGMII Ethernet |
Output power | Multi-channel power output 3.3V 5V 12V |
System Upgrade | Support local USB upgrade |
PRO-T507 function and driver support list | ||
---|---|---|
function list | Android 10.0 Linux kernel 4.9 | QT5.12.5 Linux kernel 4.9 |
Hardware function | ||
10.1 inch LVDS screen + I2C touch (1204x600) | √ | √ |
Dual 8 LVDS 1920x1080 display | √ | √ |
RGB 7 inch 1024*600 display | √ | √ |
HDMI interface | √ | |
LVDS interface | √ | √ |
TV-out | √ | |
Capacitive screen interface | √ | √ |
USB camera | √ | |
USB HOST interface | √ | √ |
USB OTG HOST interface | √ | √ |
USB OTG device interface | √ | √ |
MIPI camera interface | ||
4 channels of input or output GPIO | √ | √ |
Button ADC0 | √ | √ |
SDIO AP6236 WIFI 150Mbps | √ | √ |
SDIO AP6236 BT 4.2 | √ | |
USB camera | ||
Ethernet RTL8211F 10M/100M/1000M | √ | √ |
Ethernet IP101GR 10M/100M | √ | √ |
Infrared receiver | ||
Horn | √ | √ |
Microphone | √ | |
Serial port | √ | √ |
TF card | √ | √ |
RTC time saving HYM8563 | √ | √ |
4G communication EC20 | √ | √ |
ADC | ||
Driver list | ||
AXP858 PMIC driver | √ | √ |
Ethernet RTL8201CP driver | √ | √ |
SDIO WIFI+BT AP6236 driver | √ | √ |
UART serial port driver | √ | √ |
LVDS display driver | √ | √ |
I2C touch screen driver | √ | √ |
RTC time saving drive | √ | √ |
CVBS output driver | ||
EC20 drive | √ | √ |
SPI driver | √ | √ |
ADC drive | √ | √ |
I2C drive | √ | √ |
PWM drive | √ | √ |
SDIO driver | √ | √ |
GPIO drive | √ | √ |
USB driver | √ | √ |
Software function | ||
Dual screen simultaneous display | √ | |
Dual screen different display (LVDS_HDMI) | √ | |
Dual screen different display (RGB_HDMI) | √ | |
Simultaneous preview of usb dual cameras | √ | |
WIFI hotspot | √ | |
USB to serial port | √ | √ |
USB to network port | √ | √ |
WIFI miracase receiver | √ | |
Restore factory settings | √ | |
Awakening from body sleep | √ |
Item | The smallest | Typical | maximum | |
Power parameters | Voltage | 6.5V | 12V | 15V |
Ripple | -- | 50mV | 120mV | |
Current | 162mA | -- | -- | |
(Other peripherals not connected) Power-on current | Power supply current | 165mA | 229mA | 376mA |
Play sound | 172mA | 192mA | 319mA | |
Power supply current | LVDS 1024x600 | 325mA | 362mA | 475mA |
surroundings | Relative humidity | -- | 65% | 75% |
Working temperature | -25℃ | -- | 75℃ | |
Storage temperature | -30℃ | -0℃ | 100℃ |
Main hardware indicators | |
Size | 130mm long x 100mm wide x 14mm high |
CPU | Allwinner T507 quad-core A53 frequency 1.5GHz |
NPU | Mali-400 G31 GPU |
RAM | LDDR4 standard 2G (1G/2GB batch optional) |
Memory | eMMC standard 8G (16G/32G/64G batch optional) |
Power management | AXP853T supports standby, key switch |
Operating Voltage | Input voltage 12V, maximum power is less than 3W (no peripherals connected) |
support system | Andriod/Linux+QT |
Operating temperature | -25 to +75 degrees |
Life span | Continuous operating life is more than 5 years |
Commonly used interfaces of the backplane | |
---|---|
USB interface | 5 USB, three external plugs, one of which is OTG, two internal plugs |
UART serial port | TTL 3.3V level, one of which is Debug |
SDIO interface | 2 SDIO interfaces, one TF card, the other connects to WIFI |
ADC interface | 2-way ADC interface |
I2C interface | 2-way I2C interface |
GPIO interface | 4 channels available GPIO, can be connected with 5V or relay device |
4G | MINI PCIE interface supports 2G/3G/4G full Netcom |
LVDS display | 1 channel LVDS maximum support 1920x1080 1080P 60fps |
RGB display | 1 channel RGB 888 output, maximum support 1920x1080 1080P 60fps |
HDMI display | 1 HDMI output Maximum support 4K 60FPS |
CVBS output | 1 CVBS output |
MIPI CSI input | Support 4lane MIPI CSI input |
Voice output | 1 channel left and right channel output, 5W power amplifier connected to the bottom board |
Voice input | 1 microphone input, one lane in input (AC107 on the bottom board) |
Fast Ethernet | 100M RMII Ethernet |
Gigabit Ethernet | 100M/1000M RGMII Ethernet |
Output power | Multi-channel power output 3.3V 5V 12V |
System Upgrade | Support local USB upgrade |
PRO-T507 function and driver support list | ||
---|---|---|
function list | Android 10.0 Linux kernel 4.9 | QT5.12.5 Linux kernel 4.9 |
Hardware function | ||
10.1 inch LVDS screen + I2C touch (1204x600) | √ | √ |
Dual 8 LVDS 1920x1080 display | √ | √ |
RGB 7 inch 1024*600 display | √ | √ |
HDMI interface | √ | |
LVDS interface | √ | √ |
TV-out | √ | |
Capacitive screen interface | √ | √ |
USB camera | √ | |
USB HOST interface | √ | √ |
USB OTG HOST interface | √ | √ |
USB OTG device interface | √ | √ |
MIPI camera interface | ||
4 channels of input or output GPIO | √ | √ |
Button ADC0 | √ | √ |
SDIO AP6236 WIFI 150Mbps | √ | √ |
SDIO AP6236 BT 4.2 | √ | |
USB camera | ||
Ethernet RTL8211F 10M/100M/1000M | √ | √ |
Ethernet IP101GR 10M/100M | √ | √ |
Infrared receiver | ||
Horn | √ | √ |
Microphone | √ | |
Serial port | √ | √ |
TF card | √ | √ |
RTC time saving HYM8563 | √ | √ |
4G communication EC20 | √ | √ |
ADC | ||
Driver list | ||
AXP858 PMIC driver | √ | √ |
Ethernet RTL8201CP driver | √ | √ |
SDIO WIFI+BT AP6236 driver | √ | √ |
UART serial port driver | √ | √ |
LVDS display driver | √ | √ |
I2C touch screen driver | √ | √ |
RTC time saving drive | √ | √ |
CVBS output driver | ||
EC20 drive | √ | √ |
SPI driver | √ | √ |
ADC drive | √ | √ |
I2C drive | √ | √ |
PWM drive | √ | √ |
SDIO driver | √ | √ |
GPIO drive | √ | √ |
USB driver | √ | √ |
Software function | ||
Dual screen simultaneous display | √ | |
Dual screen different display (LVDS_HDMI) | √ | |
Dual screen different display (RGB_HDMI) | √ | |
Simultaneous preview of usb dual cameras | √ | |
WIFI hotspot | √ | |
USB to serial port | √ | √ |
USB to network port | √ | √ |
WIFI miracase receiver | √ | |
Restore factory settings | √ | |
Awakening from body sleep | √ |
Item | The smallest | Typical | maximum | |
Power parameters | Voltage | 6.5V | 12V | 15V |
Ripple | -- | 50mV | 120mV | |
Current | 162mA | -- | -- | |
(Other peripherals not connected) Power-on current | Power supply current | 165mA | 229mA | 376mA |
Play sound | 172mA | 192mA | 319mA | |
Power supply current | LVDS 1024x600 | 325mA | 362mA | 475mA |
surroundings | Relative humidity | -- | 65% | 75% |
Working temperature | -25℃ | -- | 75℃ | |
Storage temperature | -30℃ | -0℃ | 100℃ |