描述
HOTLINE:0755 - 23574363

2022110星期一 103104

专心研究,精心制作
谋求高品质发展

Rockchip PRO-RV1126 Core board

Recommend
  • Product Details



  •  CPU BLOCK DIAGRAM



    RV1126.png




    CORE BOARD BLOCK DIAGRAM



    RV1126.png




    PRODUCT DISPLAY




    RV11262.png



    HARDWARE INDEX



    Main hardware indicators
    SizeLength 60mm x Width 40mm x Height 4.8mm
    CPUSwiss chip RV1126 quad-core frequency 1200MHz
    NPU2.0 TOPS NPU
    RAMLPDDR4 standard 1G (2G/4G batch optional)
    MemoryeMMC standard 8G (4G/16G/32G/64G batch optional)
    Power managementRK809-2 supports dynamic power management
    Operating VoltageInput voltage 5V, maximum power less than 2W (no peripherals connected)
    support systemLinux 4.19 + QT 5.12
    Operating temperature-25 to +75 degrees
    Life spanContinuous operating life is more than 5 years




    COMMONINTERFACE



    Common interfaces of core board
    USB interfaceTwo USB, one independent OTG, one independent HOST
    UART serial port6 TTL 3.3V levels, one of which is Debug
    GPIO interface98 GPIOs (note: multiplexed function, please check the pin definition of this specification)
    PWM interface12 PWM channels have 3.3V/1.8V levels respectively (please check the pin definition of this specification)
    MIPI DSI display1 channel maximum 1920x1080 60fps
    RGB display1 channel RGB 888 display interface, maximum 1920x1080
    DVP camera interface1 channel 16-bit parallel DVP camera interface
    MIPI camera interface2 channels MIPI CSI RAW data camera interface
    Voice output1 channel left and right channel output, 10W power amplifier connected to the bottom
    Voice input1 PDM digital silicon microphone input, 1 analog LANE_IN input
    SDIO interface2 SDIO interfaces, one TF card, the other can be connected to WIFI
    IR infrared interface1 way IR infrared receiving interface
    ADC interface6-channel ADC interface
    I2C interface5-way I2C interface
    SPI interface2 way SPI interface
    CAN1 CAN bus
    EthernetOne RGMII PHY interface, Gigabit Ethernet
    System UpgradeSupport local USB upgrade



    CORRENT PARAMETER TABLE




    ItemMinimumTypicalMaximum
    Power parametersVoltage4.5V5V5.5V
    Ripple--50mV90mV
    Current145mA----
    Power currentBoot current125mA245mA531mA
    Without display, connect to USB camera175mA315mA580mA








    EnvironmentRelative humidity--65%75%
    Working temperature-25℃--75℃
    Storage temperature-30℃-0℃100℃






     CPU BLOCK DIAGRAM



    RV1126.png




    CORE BOARD BLOCK DIAGRAM



    RV1126.png




    PRODUCT DISPLAY




    RV11262.png



    HARDWARE INDEX



    Main hardware indicators
    SizeLength 60mm x Width 40mm x Height 4.8mm
    CPUSwiss chip RV1126 quad-core frequency 1200MHz
    NPU2.0 TOPS NPU
    RAMLPDDR4 standard 1G (2G/4G batch optional)
    MemoryeMMC standard 8G (4G/16G/32G/64G batch optional)
    Power managementRK809-2 supports dynamic power management
    Operating VoltageInput voltage 5V, maximum power less than 2W (no peripherals connected)
    support systemLinux 4.19 + QT 5.12
    Operating temperature-25 to +75 degrees
    Life spanContinuous operating life is more than 5 years




    COMMONINTERFACE



    Common interfaces of core board
    USB interfaceTwo USB, one independent OTG, one independent HOST
    UART serial port6 TTL 3.3V levels, one of which is Debug
    GPIO interface98 GPIOs (note: multiplexed function, please check the pin definition of this specification)
    PWM interface12 PWM channels have 3.3V/1.8V levels respectively (please check the pin definition of this specification)
    MIPI DSI display1 channel maximum 1920x1080 60fps
    RGB display1 channel RGB 888 display interface, maximum 1920x1080
    DVP camera interface1 channel 16-bit parallel DVP camera interface
    MIPI camera interface2 channels MIPI CSI RAW data camera interface
    Voice output1 channel left and right channel output, 10W power amplifier connected to the bottom
    Voice input1 PDM digital silicon microphone input, 1 analog LANE_IN input
    SDIO interface2 SDIO interfaces, one TF card, the other can be connected to WIFI
    IR infrared interface1 way IR infrared receiving interface
    ADC interface6-channel ADC interface
    I2C interface5-way I2C interface
    SPI interface2 way SPI interface
    CAN1 CAN bus
    EthernetOne RGMII PHY interface, Gigabit Ethernet
    System UpgradeSupport local USB upgrade



    CORRENT PARAMETER TABLE




    ItemMinimumTypicalMaximum
    Power parametersVoltage4.5V5V5.5V
    Ripple--50mV90mV
    Current145mA----
    Power currentBoot current125mA245mA531mA
    Without display, connect to USB camera175mA315mA580mA








    EnvironmentRelative humidity--65%75%
    Working temperature-25℃--75℃
    Storage temperature-30℃-0℃100℃