CPU BLOCK DIAGRAM
PRODUCT DISPLAY
PCB SIZE DRAWING
HARDWARE INDEX
| Size | 120mm long x 85mm wide x 14mm high |
| CPU | Allwinner T507 quad-core A53 frequency 1.5GHz |
| GPU | Mali-400 G31 GPU |
| RAM | LDDR4 standard 2G (1G/2GB batch optional) |
| Memory | eMMC standard 8G (16G/32G/64G batch optional) |
| Power management | AXP853T supports standby, key switch |
| Operating Voltage | Input voltage 12V, maximum power is less than 3W (no peripherals connected) |
| support system | Andriod/Linux+QT |
| Operating temperature | -25 to +75 degrees |
| Life span | Continuous operating life is more than 5 years |
COMMONINTERFACE
| USB interface | 5 USB, 3 external plug, one OTG, two internal plug |
| UART serial port | 2 TTL 3.3V levels, one of which is Debug |
| SDIO interface | 2 SDIO interfaces, one TF card, and the other to WIFI |
| ADC interface | 2-way ADC interface |
| I2C interface | 2-way I2C interface |
| GPIO interface | 4 channels available GPIO, can be connected with 5V or relay device |
| 4G | MINI PCIE interface supports 2G/3G/4G full Netcom |
| LVDS display | 1 channel LVDS maximum support 1920x1080 1080P 60fps |
| RGB display | 1 channel RGB 888 output, maximum support 1920x1080 1080P 60fps |
| HDMI display | 1 HDMI output Maximum support 4K 60FPS |
| CVBS output | 1 CVBS output |
| MIPI CSI input | Support 4lane MIPI CSI input |
| Voice output | 1 channel left and right channel output, 5W power amplifier connected to the bottom board |
| Voice input | 1 microphone input, one lane in input (AC107 on the bottom board) |
| Fast Ethernet | 100M RMII Ethernet |
| Gigabit Ethernet | 100M/1000M RGMII Ethernet |
| Output power | Multiple power output 3.3V 5V 12V |
| System Upgrade | Support local USB upgrade |
FUNCTION AND DRIVER SUPPORT LIST
| RP-T507 function and driver support list | ||
| function list | Android 10.0 | QT5.12.5 |
| Hardware function | ||
| 10.1 inch LVDS screen + I2C touch (1204x600) | √ | √ |
| Dual 8 LVDS 1920x1080 displays | √ | √ |
| RGB 7 inch 1024*600 display | √ | √ |
| HDMI interface | √ | |
| LVDS interface | √ | √ |
| TV-out | ||
| Capacitive screen interface | √ | √ |
| USB camera | √ | |
| USB HOST interface | √ | √ |
| USB OTG HOST interface | √ | √ |
| USB OTG device interface | √ | √ |
| MIPI camera interface | ||
| 4 channels can input or output GPIO | √ | √ |
| Button ADC0 | √ | √ |
| SDIO AP6236 WIFI 150Mbps | √ | √ |
| SDIO AP6236 BT 4.2 | √ | |
| Ethernet RTL8211F 10M/100M/1000M | √ | √ |
| Ethernet IP101GR 10M/100M | √ | √ |
| Infrared receiver | ||
| speaker | √ | √ |
| microphone | √ | |
| Serial port | √ | √ |
| TF card | √ | √ |
| RTC time saving HYM8563 | √ | √ |
| 4G communication EC20 | √ | √ |
| Watchdog | √ | √ |
| ADC | ||
| Driver list | ||
| AXP858 PMIC driver | √ | √ |
| Ethernet RTL8201CP driver | √ | √ |
| SDIO WIFI+BT AP6236 driver | √ | √ |
| UART serial port driver | √ | √ |
| LVDS display driver | √ | √ |
| I2C touch screen driver | √ | √ |
| RTC time saving drive | √ | √ |
| CVBS output driver | ||
| EC20 driver | √ | √ |
| SPI driver | √ | √ |
| ADC driver | √ | √ |
| I2C driver | √ | √ |
| PWM drive | √ | √ |
| SDIO driver | √ | √ |
| GPIO driver | √ | √ |
| USB driver | √ | √ |
| Software function | ||
| Dual screen display | √ | |
| Dual screen different display (LVDS_HDMI) | √ | |
| Dual screen different display (RGB_HDMI) | √ | |
| Simultaneous preview of usb dual camera | √ | |
| WIFI hotspot | √ | |
| USB to serial port | √ | √ |
| USB to network port | √ | √ |
| WIFI miracase receiver | √ | |
| reset | √ | |
| Wake up | √ | |
CORRENT PARAMETER TABLE
| Item | The smallest | Typical | maximum | |
| Power parameters | Voltage | 6.5V | 12V | 15V |
| Ripple | -- | 50mV | 120mV | |
| Current | 162mA | -- | -- | |
Power supply current | Start current | 165mA | 229mA | 376mA |
| Play sound | 172mA | 192mA | 319mA | |
Power supply current | LVDS 1024x600 | 325mA | 362mA | 475mA |
| surroundings | Relative humidity | -- | 65% | 75% |
| Operating temperature | -25℃ | -- | 75℃ | |
| storage temperature | -30℃ | -0℃ | 100℃ | |
CPU BLOCK DIAGRAM
PRODUCT DISPLAY
PCB SIZE DRAWING
HARDWARE INDEX
| Size | 120mm long x 85mm wide x 14mm high |
| CPU | Allwinner T507 quad-core A53 frequency 1.5GHz |
| GPU | Mali-400 G31 GPU |
| RAM | LDDR4 standard 2G (1G/2GB batch optional) |
| Memory | eMMC standard 8G (16G/32G/64G batch optional) |
| Power management | AXP853T supports standby, key switch |
| Operating Voltage | Input voltage 12V, maximum power is less than 3W (no peripherals connected) |
| support system | Andriod/Linux+QT |
| Operating temperature | -25 to +75 degrees |
| Life span | Continuous operating life is more than 5 years |
COMMONINTERFACE
| USB interface | 5 USB, 3 external plug, one OTG, two internal plug |
| UART serial port | 2 TTL 3.3V levels, one of which is Debug |
| SDIO interface | 2 SDIO interfaces, one TF card, and the other to WIFI |
| ADC interface | 2-way ADC interface |
| I2C interface | 2-way I2C interface |
| GPIO interface | 4 channels available GPIO, can be connected with 5V or relay device |
| 4G | MINI PCIE interface supports 2G/3G/4G full Netcom |
| LVDS display | 1 channel LVDS maximum support 1920x1080 1080P 60fps |
| RGB display | 1 channel RGB 888 output, maximum support 1920x1080 1080P 60fps |
| HDMI display | 1 HDMI output Maximum support 4K 60FPS |
| CVBS output | 1 CVBS output |
| MIPI CSI input | Support 4lane MIPI CSI input |
| Voice output | 1 channel left and right channel output, 5W power amplifier connected to the bottom board |
| Voice input | 1 microphone input, one lane in input (AC107 on the bottom board) |
| Fast Ethernet | 100M RMII Ethernet |
| Gigabit Ethernet | 100M/1000M RGMII Ethernet |
| Output power | Multiple power output 3.3V 5V 12V |
| System Upgrade | Support local USB upgrade |
FUNCTION AND DRIVER SUPPORT LIST
| RP-T507 function and driver support list | ||
| function list | Android 10.0 | QT5.12.5 |
| Hardware function | ||
| 10.1 inch LVDS screen + I2C touch (1204x600) | √ | √ |
| Dual 8 LVDS 1920x1080 displays | √ | √ |
| RGB 7 inch 1024*600 display | √ | √ |
| HDMI interface | √ | |
| LVDS interface | √ | √ |
| TV-out | ||
| Capacitive screen interface | √ | √ |
| USB camera | √ | |
| USB HOST interface | √ | √ |
| USB OTG HOST interface | √ | √ |
| USB OTG device interface | √ | √ |
| MIPI camera interface | ||
| 4 channels can input or output GPIO | √ | √ |
| Button ADC0 | √ | √ |
| SDIO AP6236 WIFI 150Mbps | √ | √ |
| SDIO AP6236 BT 4.2 | √ | |
| Ethernet RTL8211F 10M/100M/1000M | √ | √ |
| Ethernet IP101GR 10M/100M | √ | √ |
| Infrared receiver | ||
| speaker | √ | √ |
| microphone | √ | |
| Serial port | √ | √ |
| TF card | √ | √ |
| RTC time saving HYM8563 | √ | √ |
| 4G communication EC20 | √ | √ |
| Watchdog | √ | √ |
| ADC | ||
| Driver list | ||
| AXP858 PMIC driver | √ | √ |
| Ethernet RTL8201CP driver | √ | √ |
| SDIO WIFI+BT AP6236 driver | √ | √ |
| UART serial port driver | √ | √ |
| LVDS display driver | √ | √ |
| I2C touch screen driver | √ | √ |
| RTC time saving drive | √ | √ |
| CVBS output driver | ||
| EC20 driver | √ | √ |
| SPI driver | √ | √ |
| ADC driver | √ | √ |
| I2C driver | √ | √ |
| PWM drive | √ | √ |
| SDIO driver | √ | √ |
| GPIO driver | √ | √ |
| USB driver | √ | √ |
| Software function | ||
| Dual screen display | √ | |
| Dual screen different display (LVDS_HDMI) | √ | |
| Dual screen different display (RGB_HDMI) | √ | |
| Simultaneous preview of usb dual camera | √ | |
| WIFI hotspot | √ | |
| USB to serial port | √ | √ |
| USB to network port | √ | √ |
| WIFI miracase receiver | √ | |
| reset | √ | |
| Wake up | √ | |
CORRENT PARAMETER TABLE
| Item | The smallest | Typical | maximum | |
| Power parameters | Voltage | 6.5V | 12V | 15V |
| Ripple | -- | 50mV | 120mV | |
| Current | 162mA | -- | -- | |
Power supply current | Start current | 165mA | 229mA | 376mA |
| Play sound | 172mA | 192mA | 319mA | |
Power supply current | LVDS 1024x600 | 325mA | 362mA | 475mA |
| surroundings | Relative humidity | -- | 65% | 75% |
| Operating temperature | -25℃ | -- | 75℃ | |
| storage temperature | -30℃ | -0℃ | 100℃ | |